Crosby® Anchor Shackle - Bolt Type - 5/8" - G-2130 - 3.25 Ton

made-in-usa
  • Crosby®  Anchor Shackle - Bolt Type - 5/8
  • Crosby®  Anchor Shackle - Bolt Type - 5/8
  • Crosby®  Anchor Shackle - Bolt Type - 5/8
  • Crosby®  Anchor Shackle - Bolt Type - 5/8
SKU: BTAS58-CR

$52.30

USA-made Crosby®bolt type shackles are excellent for permanent or long-term applications, or if there’s a risk of a load sliding on the shackle pin, causing it to rotate. The anchor bow style accommodates loads or pulls from multiple angles.

Manufactured with a thin head bolt with nut/cotter pin combination. Forged- quenched and tempered; hot dipped galvanization adds a layer of protection from corrosive elements.



California Residents: WARNING

USA-made Crosby®bolt type shackles are excellent for permanent or long-term applications, or if there’s a risk of a load sliding on the shackle pin...

Read More

USA-made Crosby®bolt type shackles are excellent for permanent or long-term applications, or if there’s a risk of a load sliding on the shackle pin, causing it to rotate. The anchor bow style accommodates loads or pulls from multiple angles.

Manufactured with a thin head bolt with nut/cotter pin combination. Forged- quenched and tempered; hot dipped galvanization adds a layer of protection from corrosive elements.



California Residents: WARNING

Show Less

Working Load Limit:
3.25 ton

Product Weight (lbs.):
1.7

Finish:
Galvanized

Safety Factor:
6.1

Manufacturer Name:
Crosby®

Brand Part Number:
1019490

Shipping And Returns:
This item cannot be returned due to safety risks associated with used materials.

Inside Height:
2.38"

Inside Width:
1.69"

Mouth Width:
1.06"

Pin Size:
3/4"

Shackle Size:
5/8"

Product Guide:

Read More

Show Less

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
J.T.
Top Quality & USA made

I know these cost more than the imports. If you need these to perform, trust no other. These are 100% USA made forged & tested. Threads on bolt & nut are deep, and mate well, no slop. It’s apparent they are cut from full diameter rod & not cast threads like import.

The imports have a lot of slop / between nut & bolt (nut wobbles on the threads). The imports nut & bolt only start to grab the threads 1/2 way up the threads, where as the Crosby engage instantly, right at the beginning of the thread, full contact with Crosby. Quality is consistent between Crosby shackles. Imports are sometimes mis shaped, porous surface. I work in the oilfield, many crane & fork lift loads moved daily. Not a single failure from a Crosby shackle.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
J.T.
Top Quality & USA made

I know these cost more than the imports. If you need these to perform, trust no other. These are 100% USA made forged & tested. Threads on bolt & nut are deep, and mate well, no slop. It’s apparent they are cut from full diameter rod & not cast threads like import.

The imports have a lot of slop / between nut & bolt (nut wobbles on the threads). The imports nut & bolt only start to grab the threads 1/2 way up the threads, where as the Crosby engage instantly, right at the beginning of the thread, full contact with Crosby. Quality is consistent between Crosby shackles. Imports are sometimes mis shaped, porous surface. I work in the oilfield, many crane & fork lift loads moved daily. Not a single failure from a Crosby shackle.



Chat with us