Porta Winch for Stake Pockets - Inward Offset for Track-Mounted Tarps

Porta Winch for Stake Pockets - Inward Offset for Track-Mounted Tarps
  • Porta Winch for Stake Pockets - Inward Offset for Track-Mounted Tarps Thumbnail image
SKU: PW200

$72.19

Porta Winches and Porta Anchors offer the ability to turn standard stake pockets into anchor points for your winch straps. These anchors allow you to tie down a load at any of the stake pockets alongside your trailer to accommodate your load as needed. Regular clamp on winches can vibrate loose and ratchet straps just don't allow you to apply the amount of tension a winch and winch bar can. These 3-Bar stake pocket winches offer a legal solution to a common trucking industry problem.

Also available in an Outward Offset.

Not sure if this winch for stake pockets is right for your application? Call for assistance, toll free.

Tensioning

For tensioning, the WSTDA recommends in section 4.3.5 that "When using any winch, the winch mandrel shall have a minimum of two (2) and a maximum of four (4) wraps of webbing. Two to four wraps will appear like four to eight layers of webbing. Less than two wraps may result in strap slippage; more than four will place unnecessary strain on the winch. Excessive straps of webbing on the mandrel may reduce the working load limit (WLL) of the winch and may interfere with proper operation."

California Residents: WARNING

Porta Winches and Porta Anchors offer the ability to turn standard stake pockets into anchor points for your Read More

Porta Winches and Porta Anchors offer the ability to turn standard stake pockets into anchor points for your winch straps. These anchors allow you to tie down a load at any of the stake pockets alongside your trailer to accommodate your load as needed. Regular clamp on winches can vibrate loose and ratchet straps just don't allow you to apply the amount of tension a winch and winch bar can. These 3-Bar stake pocket winches offer a legal solution to a common trucking industry problem.

Also available in an Outward Offset.

Not sure if this winch for stake pockets is right for your application? Call for assistance, toll free.

Tensioning

For tensioning, the WSTDA recommends in section 4.3.5 that "When using any winch, the winch mandrel shall have a minimum of two (2) and a maximum of four (4) wraps of webbing. Two to four wraps will appear like four to eight layers of webbing. Less than two wraps may result in strap slippage; more than four will place unnecessary strain on the winch. Excessive straps of webbing on the mandrel may reduce the working load limit (WLL) of the winch and may interfere with proper operation."

California Residents: WARNING

Show Less

Working Load Limit:
5,500 lbs.

Product Weight (lbs.):
11.9

Mount Type:
Stake

Read More

Show Less

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tammy A

Worked well for our needs.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tammy A

Worked well for our needs.



Chat with us