4" Weld-On Combination Truck Tie Down Winch (Bottom Mount)
4" Weld-On Combination Truck Tie Down Winch (Bottom Mount)!
- Working load limit: 5,500 lbs.
- Product weight: 10.6 lbs.
- Additional info: Mount type: Bottom
For use with either webbing or wire rope/cable up to 4" wide. Welds on for a permanent bottom mount install.
Winch Strap Storage
This winch can store up to 15' of 4" webbing.
For tensioning, the WSTDA recommends in section 4.3.5 that "When using any winch, the winch mandrel shall have a minimum of two (2) and a maximum of four (4) wraps of webbing. Two to four wraps will appear like four to eight layers of webbing. Less than two wraps may result in strap slippage; more than four will place unnecessary strain on the winch. Excessive straps of webbing on the mandrel may reduce the working load limit (WLL) of the winch and may interfere with proper operation."
California Residents: WARNING