2" x 18' Ratchet Strap Tie Down

Our 2" wide heavy-duty ratchet straps are made to last. Constructed from premium webbing with a break strength of 13,000 lbs. (higher than the standard 12,000 lbs. of many standard straps), they offer superior abrasion-resistance and performance for your most important jobs.

Quality-Focused Ratchet Strap Construction:

• Industrial-Grade Webbing: The webbing break strength of 13,000 lbs. is stronger than 12,000 lbs. for typical 2" webbing. The yarn is thicker than that offered by most competitors, with more picks per inch used to create each strap.
  
• Superior Abrasion-Resistance: Heat-sealed ends and a thicker edge made from concentrated webbing provide better resistance to abrasion, tearing, and cutting.
• Built-In Webbing Storage: A sewn loop next to the ratchet stores extra webbing - simply wrap up the excess strap and tuck it into the loop!
  
• Longer Fixed End: Compared to standard straps, the longer fixed end lets you position the ratchet further from the anchor point after wrapping around a rub rail.
• Corrosion-Resistant Ratchet: Zinc-plated with a long, wide handle and rubber-covered finger grips for a better hold.
• Heavy-Duty Flat Hooks: Perfect for connecting to either your rub rail or under the edge of your truck / trailer. Wide contact area better distributes tie down force, and a built-in defender prevents webbing wear and tear.
• Industry-Compliant: This 2 inch ratchet strap is tagged with the working load limit to meet CVSA guidelines, FMCSA and DOT regulations, and WSTDA, CHP and North American Cargo Securement standards. Learn more about proper load handling and securement in the WSTDA safety bulletins.

Custom Ratchet Straps Available

Looking for a combination of length, color, hardware you don't see on the website? Want straps stenciled with your company name or logo? We also offer custom tie down straps. We can create the ideal strap for your application at our Iowa manufacturing facility - this not only allows us to hold all of our straps to the same high quality standards, but it also means fast shipping to you!

WSTDA Ratchet Use Guidelines

According to the WSTDA (section 4.6.8): "When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation."

Additionally, they define design factor as the "ratio of the breaking strength to the working load limit." The design factor is 3:1 for these tie down straps to build in a level of redundancy, accounting for unknown factors to keep you, your crew, and those around you safe.

Build Your Tie Down System

Complete your tie down system with strap protection, D-rings, corner protectors, and more. We also offer transport chains and binders as an alternative tie-down solution, as well as an ergonomic Good-N-Tight ratchet strap tightening handle.

California Residents: WARNING