2" x 30' Ratchet Strap Tie Down

Our 2" wide heavy-duty ratchet straps are made to last. Constructed from premium webbing with a break strength of 13,000 lbs. (higher than the standard 12,000 lbs. of many standard straps), they offer superior abrasion-resistance and performance for your most important jobs.

Quality-Focused Ratchet Strap Construction

Our 2" tie down straps have a longer fixed end than most standard straps, positioning the ratchet further from the anchor point for better access. They also have a sewn loop built-in next to the ratchet for extra webbing - simply wrap up the excess strap and tuck it into the loop!

Industrial-Grade Webbing

Our heavy duty 2" BlackLine ratchet straps have a webbing break strength of 13,000 lbs., which is stronger than the 12,000 lbs. for typical 2" webbing. The yarn used to make our webbing is slightly thicker than that offered by most competitors, with more picks per inch used to create each strap. It's also heat-sealed on the end, with a thicker edge made from concentrated webbing. Together, these features provide better resistance to abrasion, tearing, and cutting, so your ratchet straps will last longer.

Corrosion-Resistant Ratchet Characteristics

The zinc-plated ratchet component has a long, wide handle for ease of use. It also has rubber-covered finger grips for a better hold.

Benefits of 5/16" Chain Extension End Hardware

Chain extensions allow you to combine the strength of grade 70 transport chain with the softness of polyester webbing. You can use the rub rails or stake pockets on your truck or trailer to tie down your cargo without risking damage to the webbing part of the strap. The extra-length 18" chain extension is also easier to wrap around your stake pocket. This is best practice and not only provides a better, more secure hold, but also gives you the full working load limit of the stake pocket. It has a 2" D-ring, a 14-1/2" chain, and a clevis grab hook for quick and secure connections.

10,000 lb. Ratchet Strap Industry Compliance

This 2 inch ratchet strap is tagged with the working load limit to meet CVSA guidelines, FMCSA and DOT regulations, and WSTDA, CHP and North American Cargo Securement standards.

Learn more about proper load handling and securement in the WSTDA safety bulletins.

Custom Ratchet Straps Available

Looking for a combination of length, color, hardware you don't see on the website? Want straps stenciled with your company name or logo? We also offer custom tie down straps. We can create the ideal strap for your application at our Iowa manufacturing facility - this not only allows us to hold all of our straps to the same high quality standards, but it also means fast shipping to you!

Ratchet Use Guidelines

According to the WSTDA (section 4.6.8): "When using web tie downs with a winch or ratchet, a minimum of 2 and a maximum of 4 wraps of webbing shall be wound on the winch or ratchet mandrel. Excessive wraps of webbing on the mandrel may reduce the working load limit (WLL) of the web tie down and may interfere with proper operation."

What is Design Factor?

According to the WSTDA, design factor is the "ratio of the breaking strength to the working load limit" and should be 3:1 for these tie down straps. This builds in a level of redundancy to account for unknown factors, keeping you, your crew, and those around you safe.

Complete your tie down system with strap protection, D-rings, corner protectors, and more. We also offer transport chains and binders as an alternative tie-down solution, as well as an ergonomic Good-N-Tight ratchet strap tightening handle.

California Residents: WARNING