Crosby® G2130E Easy-Loc® Bolt Type Anchor Shackle - 2"

The Crosby® G2130E Easy-Loc Bolt Type Anchor Shackle in 2" (35-ton WLL) replaces the nut, bolt, and cotter pin of a standard anchor shackle with a tool-less locking collar - built for demanding production rigging where install and release speed matter as much as capacity.

For crews making and breaking connections all shift, the seconds spent wrestling a nut and cotter pin onto a standard anchor shackle add up - and a dropped cotter pin at height is a hazard, not just an inconvenience. The Easy-Loc collar takes that loose hardware out of the equation.

How the Easy-Loc Tool-less Locking System Works

One-Handed Collar Design

Securing a standard bolt-type anchor shackle takes three separate pieces - bolt, nut, and cotter pin - plus at least one wrench. The Easy-Loc system replaces the nut and cotter pin with a locking collar that engages on the bolt by hand. Seat the bolt through the shackle eyes, engage the collar, and the connection is secured: no tools, no threaded nut to run down, and no cotter pin to bend, break, or drop.

Faster Release on Repetitive Rigging

Release is the same motion in reverse, and that is where the time compounds. On a setup that is rigged and de-rigged repeatedly, the crew is not stopping to hunt for a wrench or fish a replacement cotter pin out of the gang box. Because the collar is a discrete component, a worn or damaged collar can be swapped in the field instead of retiring the whole shackle.

Rated Capacity Is Unchanged

The Easy-Loc collar is a securing method, not a capacity compromise. This shackle carries its full 35-ton Working Load Limit, permanently marked on the body, at a 6:1 design factor.

Crosby® G2130E 2" Key Features

• Tool-less Easy-Loc® collar replaces the standard nut and cotter pin - no wrenches, no loose hardware to drop or lose
• Working Load Limit: 35 tons, permanently marked on every shackle, along with the Grade 6 rating
• Forged, quenched and tempered bow with alloy bolt
• 6:1 design factor; maximum proof load is 2 times the Working Load Limit
• Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit
• Approved for use from -40°F (-40°C) to 400°F (204°C)
• Hot-dip galvanized bow and bolt
• Look for the Red Pin® - the mark of genuine Crosby® quality
• Matching Easy-Loc replacement collar and bolt kit available for field service

Standards and Certifications

• Meets or exceeds all requirements of ASME B30.26
• Meets the performance requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 3, except for those provisions required of the contractor
• Meets all performance and design requirements of ISO 2415
• Can meet charpy requirements of 31 ft-lb (42 Joules) average at -4°F (-20°C) when requested at time of order
• ABS Type Approval certification in accordance with ABS Marine Vessel Rules, ABS Mobile Offshore Units, and the ABS Guide for the Certification of Lifting Appliances - available when requested at time of order; additional charges may apply

G2130E vs. G2140E: Choosing the Right Easy-Loc Shackle

Comparing Working Load Limits at the Same Pin Size

At the same 2" pin diameter, the G2140E line is rated for 55 tons versus this G2130E model’s 35 tons - match your selection to the required Working Load Limit, not just the pin size. The two lines also differ in grade (Grade 6 here versus Grade 8 performance on the G2140E) and in design factor (6:1 versus 4:1).

Compatible Easy-Loc Replacement Parts

2" Easy-Loc Replacement Collar

If the collar on an existing G2130E 2" shackle wears out or is damaged, USCC stocks the matching replacement collar separately - there is no need to replace the full shackle. Crosby uses the same EZ-Loc collar stock number on the same-size G2130E and G2140E shackles, so one collar covers both lines at this pin size.

G2130E 2" Easy-Loc Bolt Kit

A matching replacement bolt kit - bolt plus locking collar - is also available for this model and size.

The Easy-Loc system is also compatible with standard Crosby® G-2130 Bolt Type Anchor Shackles already in service, so crews can move to tool-less bolt securement without retiring sound shackles. Contact us to confirm the Easy-Loc parts needed for your shackle's size.

Looking for a different capacity or pin size? Shop the full Crosby® Easy-Loc Shackle collection, or see our complete range of Crosby® Shackles for other locking styles.