Crosby® HR-1000 Heavy Lift Swivel Hoist Ring

This Crosby® HR-1000 Heavy Lift Hoist Ring-this size bolt diameter, " bolt length-is built for the applications where standard hoist ring bail clearance isn't enough and field conditions demand more durability. The oversized forged bail makes hook and rigging attachment faster and reduces interference under load, while 360° swivel and 180° pivot keep 100% WLL available from any angle.

Why Choose Crosby® HR-1000 Heavy Lift Hoist Rings?

When loads are heavy, field conditions are rough, and standard hoist ring bail clearance isn't enough, the HR-1000 is the correct tool.

Heavier-Built for Demanding Field Use

• Larger Forged Bail: The oversized forged bail provides more clearance for sling hooks and rigging hardware than standard hoist ring designs, making hook attachment faster and reducing interference under load.
• Quenched and Tempered Alloy Steel: All load-bearing components are heat treated for toughness and fatigue resistance in demanding field environments.
• 360° Swivel and 180° Pivot: Full range of motion maintains 100% WLL at any pull angle from 0° to 90°, including side-pull applications.
• Color-Coded Washer: Red for UNC threads, silver for metric. WLL and recommended torque permanently stamped on the washer for quick field reference.

Individually Proof Tested

• 100% Proof Tested to 2‑1/2x WLL: Every HR-1000 is individually proof tested to two-and-a-half times its working load limit with certification.
• Fatigue Rated to 20,000 Cycles: Tested at 1‑1/2 times WLL for long service life in high-cycle lifting operations.
• PIC Code for Material Traceability: Raised Product Identification Code and WLL stamped directly into the hardware for full material traceability.

Meets and Exceeds Industry Standards

ASME B30.26 - and Beyond

The Crosby® HR-1000 meets all requirements of ASME B30.26 and exceeds it in fatigue life, impact properties, and material traceability requirements the standard does not address.

Available in UNC and Metric Threads

UNC thread sizes for standard domestic applications; metric sizes for imported equipment and international project specifications.

Proper Use of Crosby® HR-1000 Hoist Rings

Torque to Specification

Install to the torque value stamped on the washer. Torque values are based on clean, dry, unlubricated threads. Do not apply lubricant unless specifically directed by Crosby®.

Verify Free Movement Before Each Lift

Before loading, confirm the bail pivots and swivels through its full range of motion. Do not proceed if movement is restricted or if any component shows damage.

When to Choose HR-1000 vs. HR-125

Select the HR-1000 when you need larger bail clearance for hooks, when operating in rough field environments, or when additional durability is required beyond the standard HR-125. The Crosby® HR-125 Swivel Hoist Rings is the right choice for standard production and indoor applications.

Common Applications for Crosby® HR-1000 Hoist Rings

• Heavy fabricated components and structural steel rigging
• Large machinery installation and field positioning
• Construction and heavy equipment assembly operations
• Applications requiring maximum bail clearance for hook attachment
• High-load industrial lifting in harsh field environments

Questions?

We also carry the Crosby® HR-125 Swivel Hoist Rings for standard applications, and the Crosby® SL-150 Slide-Loc™ for tool-free installation. Check out our full selection of rigging hardware including wire rope, shackles, eye bolts, chain, lifting slings, and more. Please contact our sales team with any product questions.

Bolt Size: 3/4" (additional sizes available)

View Product Safety Warnings

California Residents: WARNING