Crosby® HR-125 Swivel Hoist Ring

Crosby® HR-125 Swivel Hoist Rings are one of the most trusted lifting points in the industry. Where a standard eye bolt loses significant rated capacity the moment a load pulls off-axis, the HR-125 holds 100% of its working load limit from 0° to 90°. The bail pivots 180° and the base swivels 360° using a precision bushing, keeping the ring aligned with the direction of force regardless of how the load shifts during the lift.

Why Choose Crosby® HR-125 Hoist Rings?

Crosby® is the benchmark for rigging hardware quality. The HR-125 is their industry-standard swivel hoist ring—built to exceed ASME B30.26 requirements and individually verified before it leaves the factory.

Premium Alloy Construction

• Quenched and Tempered Alloy Steel: All components are alloy steel, heat treated for enhanced strength, toughness, and fatigue resistance in industrial lifting service.
• Zinc-Plated Yellow Chromate Finish: Corrosion protection for use in field conditions and industrial environments.
• E-Clip Bolt Retention: The bolt is secured with an E-clip on grooved threads, allowing full disassembly for component inspection without losing hardware. Replacement bolt kits sold separately.
• Multiple Bolt Lengths Available: Short bolts for ferrous workpieces (steel, iron); long bolts for non-ferrous workpieces (aluminum). Select the correct length for your material type.

Individually Proof Tested

• 100% Proof Tested to 2‑1/2x WLL: Every HR-125 is individually proof tested to two-and-a-half times its working load limit with certification—not statistically sampled, every unit.
• Fatigue Rated to 20,000 Cycles: Tested at 1‑1/2 times WLL for reliable long-term performance in high-cycle applications.
• Color-Coded Washer: Red washer identifies UNC (coarse) threads. Working load limit and recommended torque are permanently stamped into the washer for quick field identification.
• PIC Code for Material Traceability: Each product carries a Product Identification Code (PIC) with WLL and the Crosby® name stamped directly into the hardware.

Meets and Exceeds Industry Standards

ASME B30.26 — and Beyond

The HR-125 meets all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements—and exceeds it in areas not covered by the standard, including fatigue life, impact properties, and material traceability.

5:1 Design Factor

Ultimate load is five times the working load limit, providing the rated safety factor throughout the ring's service life.

Proper Use of Crosby® HR-125 Hoist Rings

Torque to Specification

Install to the torque value stamped on the washer for your specific thread size. Torque values assume clean, dry, unlubricated threads—do not apply lubricant unless specifically directed.

Verify Free Movement Before Each Lift

Prior to loading, confirm the bail pivots 180° and swivels 360° freely. Never lift with a restricted or damaged hoist ring.

Inspect Regularly

The E-clip design allows full disassembly for thorough inspection of all components. Check the ring and bolt for wear, deformation, or corrosion. Use only genuine Crosby® replacement parts.

Common Applications for Crosby® HR-125 Hoist Rings

• Machinery, molds, and dies in manufacturing facilities
• Fabricated steel components, weldments, and assemblies
• Equipment installation, positioning, and field maintenance
• Construction and industrial rigging where lift angles vary
• Any application requiring a certified, angle-rated lifting attachment

Questions?

We also carry the Crosby® HR-1000 Heavy Lift Hoist Rings with a larger forged bail for heavier-duty applications, and the Crosby® SL-150 Slide-Loc™ for tool-free installation. Check out our full selection of rigging hardware including wire rope, shackles, eye bolts, chain, lifting slings, and more. Please contact our sales team with any product questions.

Bolt Size: 1/2"-13 (additional sizes available)

View Product Safety Warnings

California Residents: WARNING