2" x 20' Wire Hook / E-Track Cam Buckle Strap - Blue

Make van or enclosed trailer cargo securement simple with polyester cam buckle E-track straps. Their compatibility with E-track and D-ring makes them incredibly adaptable, as you can anchor them anywhere along the length of the rail or to mounted D-rings to suit each individual load.

Our E-track tie down straps are made with high-quality components for long-lasting performance. The industrial-grade webbing is engineered to be more heavy-duty and abrasion-, tear-, and cut-resistant, with heat-sealing on the ends. It's made of slightly thicker yarn than most competitors, with more picks per inch used to create each strap. The hardware - including the cam buckle - has a zinc coating for protection against rust.

Straps are color-coded for easy identification - the 12' is yellow, the 16' is gray, and the 20' is blue.

Versatile End Hardware

Our polyester cam buckle E-track strap has both spring E-fittings and wire / double J-hooks on each end, providing the benefits of two straps in one! The E-fitting hooks directly into an E-track or A-track rail installed in a van trailer, positively engaging with a spring-loaded keeper to hold it securely in place. It's easy to install and release, and it's compatible with both horizontal and vertical track. The wire hooks connect to D-rings in your trailer or to other tie-down points when E-track is not available.

Cam Buckle Advantages

These E-track straps use a pull-to-tighten cam buckle system rather than the crank-to-tighten feature seen in ratchet strap versions. This is especially critical when over-tightening can damage precious cargo. They are faster to install and release than a ratchet, and the cam buckle's knurled grips use friction to keep straps tightly secured while on the move.

If you are looking for more tensioning power, we also carry this same strap with a ratchet - and a higher WLL.

Commercial-Grade Strap Industry Compliance

All of our tie down straps are tagged and stenciled with the working load limit to meet FMCSA and DOT regulations, CVSA and WSTDA guidelines, and North American Cargo Securement standards.

Learn more about proper load handling and securement in the WSTDA safety bulletins.

Custom E-Track Cam Straps Available

We can create E-track straps with your brand or logo on them! The branded straps look sharp and help to prevent theft. We can also customize the length, end fittings, and more - just fill out our online form or give us a call to get started.

E-Track Cargo Strap Design Factor

According to the WSTDA, design factor is the "ratio of the breaking strength to the working load limit" and should be 3:1 for these E-track tie down Cargo Straps. This builds in a level of redundancy to account for unknown factors, keeping you, your crew, and those around you safe.

Complete your cargo securement system by checking out our full selection of E-track products, including shoring beams - perfect for decking applications - and E-track cargo nets, which are commonly used as a safety solution or for cargo loss prevention.

California Residents: WARNING