Skip to content
 
$199 away from FREE SHIPPING
All
866-444-9990
What’s the Difference between Direct and Indirect Tiedowns?

What’s the Difference between Direct and Indirect Tiedowns?

When you’re hauling cargo on a flatbed (or any open deck trailer), your tiedown work is out in the open for everyone to see. That includes DOT roadside inspectors. How you secure your cargo when transporting it from one place to another is important. If you're not aware of how you're strapping down your load, you could create risk or damage to the cargo, others around you, and even yourself.

Knowing the difference between direct and indirect tiedowns, as well as understanding the rules of aggregate working load limit (WLL), is critical to safe cargo securement. Read which cargo securement method is right for your job, and how to calculate aggregate working load limit.


What’s the Difference between Direct and Indirect Tiedowns?

Direct tiedown is a tiedown that’s intended to provide direct resistance to potential shift of an item. Basically, one end of a direct tiedown is attached to the cargo itself.

Photo Courtesy of TruckingTruth.com

An indirect tiedown is a tiedown whose tension is increasing the pressure on the cargo on the deck of the vehicle. You’re using chain or straps that’s going from, over, or through the cargo, and then back to the trailer.

Photo Courtesy of TruckingTruth.com

 


How are Tiedowns Attached in Direct or Indirect Securement?

 

As we mentioned, direct securement is where the tiedown goes from the trailer to the load. This means going straight from one side of the trailer to the same side of the load. Direct securement reduces the working load limit by half as it doesn’t spread the force of the tiedown to the entire tiedown.

Indirect securement goes from, through, or over the cargo and then back to the trailer. In other words, it’s using both sides of the trailer for securement where you find the anchor point. You use chains or straps to put it over or around the cargo to the trailer point. This allows the entire working load limit to work on the tiedown point tied to, over, or through. This works as long as it goes from one side of the trailer to the other.

The method you use will depend on your setup and your cargo. You need to make sure it’s sufficient to hold your cargo in place. To ensure you’re compliant, read FMSCA’s cargo securement rules.

We also recommend reading the dos and don’ts on cargo securement to learn more about cargo securement.

 


FMSCA’s Working Load Limit Rules 

 

Now that you read the difference between direct and indirect tiedowns, you need to know the rules of working load limit (WLL), especially aggregate working load limit.

Working load limits determine how much weight or force tiedowns and other securing devices can secure without breaking. The aggregate WLL is the sum of the working load limits for each device used to secure your load. When knowing how many ratchet straps you need, FMSCA states:

“The aggregate working load limit of any securement system used to secure an article or group of articles against movement must be at least one-half the weight of the article or group of articles.”

To determine the number of ratchet straps for your job, read how many tiedowns straps do I need to secure my cargo?

 


How To Calculate Aggregate Working Load Limit

To calculate Aggregate Working Load limit, add together:

  • 50% of the working load limit of each tiedown attached to an anchor point on your vehicle, and attached directly to the cargo, or attached back to the same side of the vehicle as the original anchor point.
  • 100% of the working load limit of each tiedown attached to your vehicle and goes over, around or through your cargo, and attaches to an anchor point on the opposite side of the vehicle.
Keep in mind that the combined aggregate working load limit of any securement system must be at least 50% of the weight of the cargo being secured.

 


Tiedown Straps from US Cargo Control

 

To ensure safe transport for both your cargo and your staff, we tested extensively all of our ratchet straps  for safe use, and labeled them with working load limit (WLL) information. Most also meet requirements / guidelines from several key authorities:

  • Commercial Vehicle Safety Alliance (CVSA)
  • Department of Transportation (DOT)
  • Web Sling & Tie Down Association (WSTDA)
  • North American Cargo Securement

If you don’t see what you’re looking for, we can create custom ratchet straps for you. Whether you need one simple assembly or multiple intricate configurations, we can use any combination of strap size and fittings to create the perfect tie down solution. Just fill out our form or call one of our product experts at 800-969-654 to learn more!


More Trucking Equipment from US Cargo Control

If you need additional trucking equipment, we have everything you need to outfit your truck. From heavy-duty tarps, corner protectors, and transport chain and binders, we'll make sure to get you what you want, when you need it. Start by shopping by trailer type

 

 

Other reads on Cargo Securement and Tiedowns:

A Comprehensive Guide to Ratchet Straps

How to Care for Ratchet Straps

What are Ratchet Straps Made of?

How US Cargo Control Creates High Quality Custom Ratchet Straps



Our team looks forward to getting you the quality products you deserve. If you wish to learn more about our ratchet straps, head over to US Cargo Control or give our team a call at 866-444-9990.

Back to blog