Combination Winch for Cable & Webbing

Eliminate the need to constantly switch between different winch types - this combination winch is designed to work with both webbing and cable so you can change depending on your current application.

Designed for permanent installation, these winches weld directly onto your trailer to create a strong, stable anchor point for your tie-down system. No shifting, no repositioning - just consistent performance every time you throw a strap. Built from heavy-duty steel with a corrosion-resistant finish and a 5,500 lb. working load limit, these winches are made to handle tough hauls and long days on the road without compromise.

The standard design offers superior excess webbing storage compared to low profile options, so you'll have more webbing available to handle larger cargo.

These winches are compatible with all of our winch bars and our winch straps, which come with a variety of end fittings.

Weld-On Winch Features

• Bottom-Mount: Installs on the underside of your trailer frame.
• Permanent Installation: Welded directly to the trailer frame, perfect for handling consistent load types.
• Built-In Strap Storage: Can store up to 15' of 4"W webbing.
• Durable Powder Coat Finish: For superior rust-resistance.
• Extend Width Pawl: Offers a larger grip area so it's easier to disengage and release tension from the winch.

Tensioning

For tensioning, the WSTDA recommends in section 4.3.5 that "When using any winch, the winch mandrel shall have a minimum of two (2) and a maximum of four (4) wraps of webbing. Two to four wraps will appear like four to eight layers of webbing. Less than two wraps may result in strap slippage; more than four will place unnecessary strain on the winch. Excessive straps of webbing on the mandrel may reduce the working load limit (WLL) of the winch and may interfere with proper operation."

View Product Safety Warnings

California Residents: WARNING