4" Low Profile Sliding Winch (Bottom Mount)
4" Low Profile Sliding Winch (Bottom Mount)!
- Working load limit: 5,500 lbs.
- Product weight: 9 lbs.
- Additional info: Mount type: Sliding
Slot width: 4"
Notched to insert and slide on winch track for adjusting placement while locking under tension. Storable winches are assembled for bottom mount applications. Accommodate 4" wide webbing. Low profile. Ideal for flatbed hauling tie down systems.
Winch Strap Storage
This storable winch can store approximately 15' of webbing.
For tensioning, the WSTDA recommends in section 4.3.5 that "When using any winch, the winch mandrel shall have a minimum of two (2) and a maximum of four (4) wraps of webbing. Two to four wraps will appear like four to eight layers of webbing. Less than two wraps may result in strap slippage; more than four will place unnecessary strain on the winch. Excessive straps of webbing on the mandrel may reduce the working load limit (WLL) of the winch and may interfere with proper operation."
California Residents: WARNING
Reviews + Q&A
Reviews + Q&A
Fit my application just fine. Used them on my gooseneck trailer on the dovetail. The regular size is just a bit longer and keeps scrapping the ground when in use. You can't wind your whole strap on the winch with these .
I received this item early than I was told . I will say it is a little shorter than I was expecting . However since I was putting it close to the drive tire on a straight truck it works just fine . I did have to cut some of the strap off , but I never use all of the strap anyway .