Filter

Body Length
Show more
Show less
Manufacturer Name
Show more
Show less
Turnbuckle Size
Show more
Show less
Working Load Limit
Show more
Show less

Crosby® Jaw & Jaw - HG-228

7 Products

Filter Results
  • Body Length: 12"
  • Clear All
    1. Filtered:
    2. 12"
    3. Clear All

    1/2" Crosby® Jaw & Jaw Galvanized Turnbuckle - HG-228

    WLL 2200 lbs.
    Standard Lead Time 1-3 business days.
    Starting at
    SKU: JJTBGV12X6-CR

    3/4" Crosby® Jaw & Jaw Galvanized Turnbuckle HG-228

    WLL 5200 lbs.
    Standard Lead Time 1-3 business days.
    Starting at
    SKU: JJTBGV34X6-CR

    5/8" Crosby® Jaw & Jaw Galvanized Turnbuckle - HG-228

    WLL 3500 lbs.
    Standard Lead Time 1-3 business days.
    Starting at
    SKU: JJTBGV58X12-CR

    7/8" Crosby® Jaw & Jaw Galvanized Turnbuckle - HG-228

    WLL 7200 lbs.
    Standard Lead Time 1-3 business days.
    Starting at
    SKU: JJTBGV78X12-CR

    1" Crosby® Jaw & Jaw Galvanized Turnbuckle - HG-228

    WLL 10000 lbs.
    Standard Lead Time 1-3 business days.
    Starting at
    SKU: JJTBGV1X18-CR

    1-1/4" Crosby® Jaw & Jaw Galvanized Turnbuckle - HG-228

    WLL 15200 lbs.
    Standard Lead Time 1-3 business days.
    Starting at
    SKU: JJTBGV114X12-CR

    1-1/2" Crosby® Jaw & Jaw Galvanized Turnbuckle - HG-228

    WLL 21400 lbs.
    Standard Lead Time 1-3 business days.
    Starting at
    SKU: JJTBGV112X24-CR
    Jaw & Jaw turnbuckles feature a jaw end fitting on both ends. Jaws, the most highly stressed part of the assembly, endure normalizing or Crosby®"s Quenched and Tempered® process to provide consistent performance for critical applications. Bodies are heat-treated by normalizing. Hot-dip galvanizing deposits a protective layer on components and helps prevent corrosion, extending both the service life and appearance of steel. Each body has UNC threads; a modified UNJ thread on the end fittings improves fatigue properties.

    Forged jaw ends are fitted with bolts and nuts for 1/4" through 5/8", and pins and cotters on 3/4" through 2-3/4" sizes.

    Each component contains the Crosby® logo, size, and Product Identification Code (PIC). Crosby®"s PIC system allows for traceability of each turnbuckle through the manufacturing process (from raw material to production), as well as helps ensure that proper controls are maintained.


    Fatigue Rated® to 20,000 cycles at 1-1/2 times the working load limit, and will meet the requirements of the Euronorm standards for fatigue.Proof load is 2-1/2 times the working load limit. Ultimate load is 5 times the working load limit.

    NOTE: For straight or in-line pull only.


    Crosby® jaw-jaw turnbuckles meet or exceed all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements. Also meet other critical performance requirements — including fatigue life, impact properties, and material traceability — not addressed by ASME B30.26.

    The theoretical reserve capability of each turnbuckle is at least 5 times the working load limit set by Federal Specifications FF-T-791b, Type 1, Form 1, Class 7, and ASTM F-1145, except for those provisions required of the contractor.



    We sell other styles of Crosby turnbuckles, including Jaw & Eye, Eye & Eye, Hook & Eye, and Hook & Hook.
    Chat with us