{"title":"Crosby® G-2130E Bolt Type Easy-Loc Shackles","description":"\u003ch1\u003eCrosby® G2130E Easy-Loc Bolt Type Anchor Shackles\u003c\/h1\u003e\n\u003cp\u003eThe Crosby® G2130E Easy-Loc is a Grade 6 bolt type anchor shackle that replaces the traditional nut-and-cotter-pin securement with a tool-less locking collar that engages by hand - no wrenches required. Six sizes cover 1-3\/4\" through 4\", from 25 to 150 metric tons.\u003c\/p\u003e\n\u003cp\u003eFor crews running production rigging, a loose cotter pin at height is a real hazard, not just an inconvenience. Bolt securement has to be checked before every lift to avoid dropped objects - the Easy-Loc collar removes that risk without adding a step to your rigging process.\u003c\/p\u003e\n\u003ch2\u003eG2130E Sizes and Capacities\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eNominal size\u003c\/th\u003e\n\u003cth\u003eWorking Load Limit\u003c\/th\u003e\n\u003cth\u003eCrosby stock no.\u003c\/th\u003e\n\u003cth\u003eWeight each\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e25 tons\u003c\/td\u003e\n\u003ctd\u003e1021545\u003c\/td\u003e\n\u003ctd\u003e34 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003ctd\u003e35 tons\u003c\/td\u003e\n\u003ctd\u003e1021554\u003c\/td\u003e\n\u003ctd\u003e49 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e55 tons\u003c\/td\u003e\n\u003ctd\u003e1021563\u003c\/td\u003e\n\u003ctd\u003e100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003ctd\u003e85 tons\u003c\/td\u003e\n\u003ctd\u003e1021572\u003c\/td\u003e\n\u003ctd\u003e156 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e120 tons\u003c\/td\u003e\n\u003ctd\u003e1021581\u003c\/td\u003e\n\u003ctd\u003e256 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003ctd\u003e150 tons\u003c\/td\u003e\n\u003ctd\u003e1021590\u003c\/td\u003e\n\u003ctd\u003e306 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow the Easy-Loc Locking System Works\u003c\/h2\u003e\n\u003ch3\u003eTool-less Collar Design\u003c\/h3\u003e\n\u003cp\u003eSecuring a standard bolt type anchor shackle takes three separate pieces - bolt, nut, and cotter pin - plus at least one wrench. The Easy-Loc system replaces the nut and cotter pin with a locking collar that engages on the bolt by hand. Seat the bolt through the shackle eyes, engage the collar, and the connection is secured: no tools, no threaded nut to run down, and no cotter pin to bend, break, or drop.\u003c\/p\u003e\n\u003ch3\u003eFaster Release on Repetitive Rigging\u003c\/h3\u003e\n\u003cp\u003eRelease is the same motion in reverse, and that is where the time compounds. On a setup that is rigged and de-rigged repeatedly through a shift, the crew is not stopping to hunt for a wrench or fish a replacement cotter pin out of the gang box.\u003c\/p\u003e\n\u003ch3\u003eRated Capacity Is Unchanged\u003c\/h3\u003e\n\u003cp\u003eThe Easy-Loc collar is a securing method, not a capacity compromise. Every G2130E carries its full Working Load Limit and its Grade 6 rating permanently marked on the bow, at a 6:1 design factor.\u003c\/p\u003e\n\u003ch2\u003eG2130E Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTool-less Easy-Loc® locking collar - engages and releases by hand, no wrenches needed\u003c\/li\u003e\n\u003cli\u003eWorking Load Limit and Grade 6 permanently marked on every shackle\u003c\/li\u003e\n\u003cli\u003eForged, quenched and tempered bow with alloy bolt\u003c\/li\u003e\n\u003cli\u003e6:1 design factor; maximum proof load is 2× the Working Load Limit\u003c\/li\u003e\n\u003cli\u003eIndividually proof tested to 2× the Working Load Limit at 85 tons and above\u003c\/li\u003e\n\u003cli\u003eFatigue rated to 20,000 cycles at 1-1\/2× the Working Load Limit (25-55 ton sizes)\u003c\/li\u003e\n\u003cli\u003eAvailable hot-dip galvanized (G) or self-colored (S); the 85, 120, and 150 ton bows are hot-dip galvanized with Dimetcoted® bolts painted red\u003c\/li\u003e\n\u003cli\u003eApproved for use from -40°F (-40°C) to 400°F (204°C)\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds all requirements of ASME B30.26\u003c\/li\u003e\n\u003cli\u003eMeets the performance requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 3, except for those provisions required of the contractor\u003c\/li\u003e\n\u003cli\u003eMeets all performance and design requirements of ISO 2415\u003c\/li\u003e\n\u003cli\u003e3.1 certification available as standard for charpy and statistical proof test to EN 13889 on the 25 ton size; charpy 31 ft-lb (42 Joules) average at -4°F (-20°C) available on other sizes when requested at time of order\u003c\/li\u003e\n\u003cli\u003eABS Type Approval in accordance with ABS Marine Vessel Rules, ABS Mobile Offshore Units, and the ABS Guide for the Certification of Lifting Appliances - available on request; additional charges may apply\u003c\/li\u003e\n\u003cli\u003eLook for the Red Pin® - the mark of genuine Crosby® quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eG2130E or G2140E?\u003c\/h2\u003e\n\u003cp\u003eThe G2130E is the Grade 6 line. If you need more capacity at the same pin size, the G2140E is the alloy, Grade 8 performance line - a 2\" pin is rated 35 tons on the G2130E versus 55 tons on the G2140E, and the G2140E range runs to 250 tons. The G2140E is also individually proof tested at every size, where the G2130E is individually proof tested at 85 tons and above. Where a lighter-duty, lower-cost shackle covers your load requirement, the G2130E is the better fit.\u003c\/p\u003e\n\u003cp\u003eMatch your selection to the required Working Load Limit, not just the pin size. Shop the full Crosby® G2140E Easy-Loc collection to compare.\u003c\/p\u003e\n\u003ch2\u003eShop G2130E Replacement Components\u003c\/h2\u003e\n\u003cp\u003eA worn or damaged bolt or collar does not have to mean replacing the whole shackle. Crosby supplies the Easy-Loc bolt and its locking collar under separate stock numbers, so you can replace only the part that is worn.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy-Loc replacement collars\u003c\/strong\u003e - stocked for every G2130E size, 1-3\/4\" through 4\". Crosby uses the same EZ-Loc collar stock number on the same-size G2130E and G2140E shackles, so one collar covers both lines at a matching pin size; the 1-3\/4\" and 2\" G2130E shackles also share a single collar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy-Loc replacement bolt kits\u003c\/strong\u003e - stocked for all six G2130E sizes, each carrying its own Crosby stock number matched to the parent shackle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter replacing any load-bearing hardware, fit only genuine Crosby® parts, inspect the shackle before it returns to service, and where required have a qualified person recertify it.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the design factor on the G2130E?\u003c\/h3\u003e\n\u003cp\u003e6:1 across the full 25 to 150 ton range, with a maximum proof load of 2× the Working Load Limit.\u003c\/p\u003e\n\u003ch3\u003eWhich G2130E sizes are individually proof tested?\u003c\/h3\u003e\n\u003cp\u003eCrosby individually proof tests the 85, 120, and 150 ton sizes to 2× the Working Load Limit. On the 25 ton size, 3.1 certification covering charpy and statistical proof test to EN 13889 is available as standard.\u003c\/p\u003e\n\u003ch3\u003eCan you side-load a G2130E shackle?\u003c\/h3\u003e\n\u003cp\u003eEasy-Loc shackles are designed to carry load along their centerline, and angular loading should be avoided wherever possible. Crosby publishes rated-capacity reductions for angular loading that vary by shackle size. Before side-loading, refer to the current Crosby warning and application instructions supplied with the product, and contact Crosby Engineering for any load applied beyond their published limits.\u003c\/p\u003e\n\u003ch3\u003eWhat temperature range is the G2130E approved for?\u003c\/h3\u003e\n\u003cp\u003e-40°F to 400°F (-40°C to 204°C). For low-temperature impact requirements, charpy testing of 31 ft-lb (42 Joules) average at -4°F (-20°C) is available on request at time of order.\u003c\/p\u003e\n\u003cp\u003eSee our complete range of Crosby® Shackles for other locking styles.\u003c\/p\u003e","products":[],"url":"https:\/\/www.uscargocontrol.com\/collections\/crosby%c2%ae-g-2130e-bolt-type-easy-loc-shackles-1.oembed","provider":"US Cargo Control","version":"1.0","type":"link"}