Recovery Straps & Tow Straps

Recovery Straps and Tow Straps can be made to any size including length, width and even multiple plys.  Recovery Straps are available from 19,800 lbs - 100,000 lbs.  Each end of the strap has additional protection from a Cordura Sleeve to prevent wear.  The webbing used for our recovery straps is designed to handle the toughest jobs around.  All of our recovery straps and tow straps can be used for recovery applications.  When using recovery straps you should be sure to keep safety in mind.  You should never use a tow strap with hooks on the ends of the strap for pulling out a vehicle.  If the hardware on the tow strap breaks, it could cause serious injury.  Even when using a recovery strap without hooks you should stand back away from the strap in case it breaks.  A recovery strap under tension will snap when it breaks and could be dangerous.  Before using recovery straps you should check it for damage.  A damaged recovery strap will lose strength.  When attaching a recovery strap you should pass it through the eye on one end of the strap to choke the frame or hook of the vehicle being pulled out.  When hooking up the recovery strap you should make sure that the strap will not be cut by any part of the vehicle being pulled.  When pulling the vehicle out you should drive slow and make sure there are no obstructions that will damage the recovery strap.  One last thing to keep in mind when purchasing a recovery strap.  You should choose a strap that is strong enough, but not so strong that it won't stretch.  In most recovery applications it is beneficial for the recovery strap to stretch to take some of the shock out of the pull.  If you need help chosing a recovery strap we will be glad to assist you.  Just call us toll free at 866-444-9990 and have a great day!  These high quality tow straps and recovery straps are MADE IN THE USA!