Wire Rope Slings-Single Leg 6x19

Our single leg wire rope slings, sometimes called eye & eye slings, are made with top quality in mind.  The flemish eye spliced with a carbon steel sleeve offer the greatest safety with 100% wire rope efficiency.  These slings are rugged and reliable and a very popular choice among wire slings.  The final inspection of these slings involves painting the sleeves gold to verify swaging is complete and done in a proper manner.  Each single leg sling is tagged with capacity, care and instruction tags. Metal tags are available for an extra charge.

Wire Rope Sling Capacity Chart

Wire rope sling capacity chart


More About Wire Rope Slings-Single Leg 6x19

Wire Rope Sling Assemblies

The wire rope sling chart above shows the load capacities of our single leg wire rope slings.

The single leg wire slings are made of 6x19 wire rope, like our sliding choker wire slings.
We have 6x37 wire rope slings available in larger diameters (1-1/8" thru 1-1/2") of the single leg eye and eye slings.  We also offer cable laid slings, 2 leg bridles, 3 leg bridles, and 4 leg bridles.


There are also many different fittings you can have put on the ends of the single leg slings also.  The prices below are for eye and eye only but feel free to contact our sales team professionals toll free at 800-660-3585 and they will be glad to help you with any custom sling assembly you are looking for.  Some of the fittings available are pictured below for your convenience.

End Fitting Options for Single Leg Wire Rope Slings

Sling Proof Testing Certificates
Proof testing certificates can be supplied with your order for a nominal fee and must be requested at the time of order. Proof tests are performed in the factory where the sling is pull tested to 2x the vertical rating and officially recorded as proof for governing bodies. During the standard manufacturing process, only random slings during a production run are tested for compliance; in order to provide proof testing certificates with your order, every sling must be pull tested at the time of manufacture.